• where can I get hex file to control this BH!415F pll

Posted: **Tue Jul 01, 2025 2:22 pm**

https://www.pcbway.com/project/sharepro ... LATOR.html

Posted: **Wed Jul 02, 2025 10:11 am**

suppose it will tune to all frequencies with it been a 1415f, 17f dose't tune to all frequencies

you can injet your own stereo into them too, with this one i'm not sure

Posted: **Wed Jul 02, 2025 11:33 am**

It is a 1415f pll, it has 87.5Mhz to 108Mhz and left and right input for stereo Fm

Posted: **Wed Jul 02, 2025 9:11 pm**

Then why not asking that turkish guy

Posted: **Thu Jul 03, 2025 8:02 am**

I remember the old Freddos'page had a project with the 1415, lcd and pic16f628
There is a mirror of that web somewhere. With hex and all. Maybe only adapt some wiring it may work without getting the exact firmware for that board.

Posted: **Thu Jul 03, 2025 6:25 pm**

Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.

Posted: **Fri Jul 04, 2025 9:31 am**

maybe something here I don’t know

http://electronics-diy.com/index.php

Posted: **Sat Jul 05, 2025 8:26 am**

yellowbeard wrote: ↑Thu Jul 03, 2025 6:25 pm Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.

There is another one! I found what I remembered.
If you go to the tab "transmitters" there is again the single chip BH1415 project, but the layout has the PIC16F628 and there is hex file for both 8x2 and 16x2 LCD display.

Posted: **Sat Jul 05, 2025 3:01 pm**

radium98 wrote: ↑Wed Jul 02, 2025 9:11 pm Then why not asking that turkish guy

He doesn't respond

Posted: **Sat Jul 05, 2025 3:38 pm**

Krakatoa wrote: ↑Sat Jul 05, 2025 8:26 am
yellowbeard wrote: ↑Thu Jul 03, 2025 6:25 pm Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.
There is another one! I found what I remembered.
If you go to the tab "transmitters" there is again the single chip BH1415 project, but the layout has the PIC16F628 and there is hex file for both 8x2 and 16x2 LCD display.

Thanks a lot, this will be helpful, I can do rewiring of data lines to make work

where can I get hex file to control this BH!415F pll

where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll