where can I get hex file to control this BH!415F pll

mwile · Post by **mwile** » Tue Jul 01, 2025 2:22 pm

https://www.pcbway.com/project/sharepro ... LATOR.html

radionortheast · Post by **radionortheast** » Wed Jul 02, 2025 10:11 am

suppose it will tune to all frequencies with it been a 1415f, 17f dose't tune to all frequencies

you can injet your own stereo into them too, with this one i'm not sure

mwile · Post by **mwile** » Wed Jul 02, 2025 11:33 am

It is a 1415f pll, it has 87.5Mhz to 108Mhz and left and right input for stereo Fm

radium98 · Post by **radium98** » Wed Jul 02, 2025 9:11 pm

Then why not asking that turkish guy

Krakatoa · Post by **Krakatoa** » Thu Jul 03, 2025 8:02 am

I remember the old Freddos'page had a project with the 1415, lcd and pic16f628
There is a mirror of that web somewhere. With hex and all. Maybe only adapt some wiring it may work without getting the exact firmware for that board.

yellowbeard · Post by **yellowbeard** » Thu Jul 03, 2025 6:25 pm

Here is the mirror of freddo's page, BH1415 is under PIC16F876 in the side bar:
https://radiostudio36.nl/freddos/default.htm
It may not work is the diagram is not identical, and that Turkish guy seems to have been giving the software for his one away - your best bet would be to contact him. He has a amateur radio callsign TB5CVN and when you search it a ton of stuff comes up at thingverse, github and pcbway, he probably be pleased someone wants to build his project.

where can I get hex file to control this BH!415F pll

where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll

Re: where can I get hex file to control this BH!415F pll