I am tempted to put a wire joining one of the 4.97V points to a 2.46V one
.
My Elenos ETG 1000W has died
-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
I am tempted to put a wire joining one of the 4.97V points to a 2.46V one
.
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
Jumper from + of C3 to the VCC end of R5
And it worked 4.97V at all VCC points
.
You do not have the required permissions to view the files attached to this post.
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
Working fine - Heatsink is roasting
Biut........ Now for some reason the Reflected Power is not reading on the Display
Looks like the next problem
.
You do not have the required permissions to view the files attached to this post.
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.-
jvok
- tower block dreamin
- Posts: 368
- Joined: Sun Aug 16, 2020 2:44 pm
- Location: Probably up a mast
Re: My Elenos ETG 1000W has died
Glad you got the screen working again. Maybe ref power is another bad trace?
Looks like some corrosion in some of those pics specially on the nuts that hold the board in. Not surprised if you keep running into problems like that. Guess the salty Mediterranean airs not so good for electronics
Looks like some corrosion in some of those pics specially on the nuts that hold the board in. Not surprised if you keep running into problems like that. Guess the salty Mediterranean airs not so good for electronics
-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
Thanks
From first inspection it looks like it's the Directional Coupler
It was a transmitter was originally from a Pirate station in Ireland
Plenty of corrosion in the case when I first got it
.
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.-
zl1tkldon
- ne guy
- Posts: 4
- Joined: Sat Jun 15, 2024 10:03 am
- Location: New Zealand
- Contact:
Re: My Elenos ETG 1000W has died
q2 or r64 470ohms open
-
zl1tkldon
- ne guy
- Posts: 4
- Joined: Sat Jun 15, 2024 10:03 am
- Location: New Zealand
- Contact:
Re: My Elenos ETG 1000W has died
to remove hot glue a bent piece placed of #8 wire heated up to just melt the glue and on one end then when cold open like a can of sardines
-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
Nah...... that's the Backlight Control
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.-
BriansBrain
- proppa neck!
- Posts: 567
- Joined: Sat Jun 08, 2019 1:22 pm
- Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
- Contact:
Re: My Elenos ETG 1000W has died
Thanks but...
I have determined the Error was not on the Board covered in the Glue Gun Gunk
The Most Unique English Speaking Radio Station in the Canaries... Possibly the World.