temperature, operate
Thought I'd try one of these.....
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
- Electronically
- tower block dreamin
- Posts: 431
- Joined: Wed May 13, 2015 11:43 am
Re: RE: Re: Thought I'd try one of these.....
It says k19radio on top of your chip. Is it the mrf9180?.Just been sure as you have it covered with k19radio.rigmo wrote:MRF9180 170W tuned with network analyser input 1.5W
protection : lighting, SWR double, overheating doable.
Sent from my AMN-LX9 using Tapatalk
- teckniqs
- proppa neck!
- Posts: 3180
- Joined: Thu Aug 21, 2014 11:37 am
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: RE: Re: Thought I'd try one of these.....
pleas do nor ask silly questions..Electronically wrote: ↑Thu Apr 16, 2020 9:57 am It says k19radio on top of your chip. Is it the mrf9180?.Just been sure as you have it covered with k19radio.
Sent from my AMN-LX9 using Tapatalk
1000% mrf9180
This is not cover! this is for temperature dissipation! copper is the best...
MRF9180 is very sensitive, to sensitive ( lighting, hi swr..) ! its cheep 10usd 170W new but for ragged mosfet you need to spend min 100usd...
for max output 170 175W board need to be tuned with network analyser...
- Electronically
- tower block dreamin
- Posts: 431
- Joined: Wed May 13, 2015 11:43 am
Re: RE: Re: RE: Re: Thought I'd try one of these.....
How's it a silly question. You had it covered I could be thinking it's no a Mrf9180 can't see through that k19radio cover . So now you explained it. I'll take your word for it.rigmo wrote:pleas do nor ask silly questions..Electronically wrote: ↑Thu Apr 16, 2020 9:57 am It says k19radio on top of your chip. Is it the mrf9180?.Just been sure as you have it covered with k19radio.
Sent from my AMN-LX9 using Tapatalk
1000% mrf9180
This is not cover! this is for temperature dissipation! copper is the best...
MRF9180 is very sensitive, to sensitive ( lighting, hi swr..) ! its cheep 10usd 170W new but for ragged mosfet you need to spend min 100usd...
for max output 170 175W board need to be tuned with network analyser...
Sent from my AMN-LX9 using Tapatalk
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: RE: Re: RE: Re: Thought I'd try one of these.....
Sir this is not cover ( vogue magazine ) this is ldmos bracket!Electronically wrote: ↑Thu Apr 16, 2020 4:28 pm How's it a silly question. You had it covered I could be thinking it's no a Mrf9180 can't see through that k19radio cover . So now you explained it. I'll take your word for it.
Sent from my AMN-LX9 using Tapatalk
- Electronically
- tower block dreamin
- Posts: 431
- Joined: Wed May 13, 2015 11:43 am
Re: RE: Re: RE: Re: RE: Re: Thought I'd try one of these.....
OK smart arse lolrigmo wrote:Sir this is not cover ( vogue magazine ) this is ldmos bracket!Electronically wrote: ↑Thu Apr 16, 2020 4:28 pm How's it a silly question. You had it covered I could be thinking it's no a Mrf9180 can't see through that k19radio cover . So now you explained it. I'll take your word for it.
Sent from my AMN-LX9 using Tapatalk
Sent from my AMN-LX9 using Tapatalk
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Thought I'd try one of these.....
you cover me ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Electronically
- tower block dreamin
- Posts: 431
- Joined: Wed May 13, 2015 11:43 am
Re: RE: Re: Thought I'd try one of these.....
I don't go under cover lolrigmo wrote:you cover me
Sent from my AMN-LX9 using Tapatalk
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: RE: Re: Thought I'd try one of these.....
discovery canal hahhaElectronically wrote: ↑Thu Apr 16, 2020 9:49 pmI don't go under cover lolrigmo wrote:you cover me
Sent from my AMN-LX9 using Tapatalk
-
- ne guy
- Posts: 6
- Joined: Fri Apr 26, 2019 10:40 pm
- Location: Ocala, Florida (yep, I'm a Yank)
Re: Thought I'd try one of these.....
Say rigmo, did you read how to get 200W from cheap 9180? No need to spend $100. for more rugged, brand name mosfet. Anyone can make any 9180 go 200 Watts just by adding a couple schottky diodes. They cost pennies. Also, this was tested at this power level for hours... for days! Read posts on this thread, one year ago. April, May 2019. Maybe newer, expensive name brand 9180's have this protection diode built into the case. I like cheap when you can push it safely to this level. Just need good heatsink, good LP filter.
- Electronically
- tower block dreamin
- Posts: 431
- Joined: Wed May 13, 2015 11:43 am
Re: RE: Re: RE: Re: Thought I'd try one of these.....
Ain't having my canal lolrigmo wrote:discovery canal hahhaElectronically wrote: ↑Thu Apr 16, 2020 9:49 pmI don't go under cover lolrigmo wrote:you cover me
Sent from my AMN-LX9 using Tapatalk
Sent from my AMN-LX9 using Tapatalk
-
- Neckmin
- Posts: 337
- Joined: Fri Oct 17, 2014 10:35 am
Re: Thought I'd try one of these.....
I once thought I would try and see how much power I could squeeze out of a 9180. I increased the voltage upto about 50 volts, I got almost 200W output of it, then came the big flash (no loud bang) but the whole device did light up for a split second - then the power output went to zero!
- teckniqs
- proppa neck!
- Posts: 3180
- Joined: Thu Aug 21, 2014 11:37 am
Re: Thought I'd try one of these.....
I've seen some combine two of those amps and get about 350w out of them.
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
- teckniqs
- proppa neck!
- Posts: 3180
- Joined: Thu Aug 21, 2014 11:37 am
Re: Thought I'd try one of these.....
They made their own combiners, I've got the photo of it but I am no longer in contact with this person and unfortunately I haven't got their permission to put it up.
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Thought I'd try one of these.....
Yes sure tru... but I do not wont push over 170W its to sensitive and heating required bigger heatsink ..... I like he can last for ever practically, on lower temperature hi efficacy. ..Lubomir73 wrote: ↑Fri Apr 17, 2020 4:02 am Say rigmo, did you read how to get 200W from cheap 9180? No need to spend $100. for more rugged, brand name mosfet. Anyone can make any 9180 go 200 Watts just by adding a couple schottky diodes. They cost pennies. Also, this was tested at this power level for hours... for days! Read posts on this thread, one year ago. April, May 2019. Maybe newer, expensive name brand 9180's have this protection diode built into the case. I like cheap when you can push it safely to this level. Just need good heatsink, good LP filter.
if you push, You know lifetime...
I push mine mrf151G over 3??watt.. (short tests) any seance , no ? better use right coax LMRxxx at least.. 2bay or 4 bay dipoles to get REAL GAIN... alone power without antena sistem and coax is useless ...
I do not need write details u know... good luck with over loads... i do not use drugs on my toys
![Smile :)](./images/smilies/icon_e_smile.gif)
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
- rigmo
- tower block dreamin
- Posts: 472
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Thought I'd try one of these.....
ITs easy to make.. with coax(75R) or coils.. need50 - 100R carbon LOAD..
You can find few calcuators,
nice exsample http://g4fev.atspace.com/mrf186linear.htm
https://www.changpuak.ch/electronics/wi ... plit_2.php
https://www.changpuak.ch/electronics/co ... _split.php
We are hear right and now for prosper and make good job and not hide knowledge... ho hide is public enemy no1
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Thought I'd try one of these.....
I like your progressive attitude Rigmo but I think some people on this forum are reluctant to give up their intellectual property for good reason.rigmo wrote: ↑Fri Apr 17, 2020 2:50 pmITs easy to make.. with coax(75R) or coils.. need50 - 100R carbon LOAD..
You can find few calcuators,
nice exsample http://g4fev.atspace.com/mrf186linear.htm
https://www.changpuak.ch/electronics/wi ... plit_2.php
https://www.changpuak.ch/electronics/co ... _split.php
We are hear right and now for prosper and make good job and not hide knowledge... ho hide is public enemy no1