Dutch driver board issues

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
Gigahertz
no manz can test innit
no manz can test innit
Posts: 154
Joined: Fri May 08, 2015 6:42 pm

Dutch driver board issues

Post by Gigahertz » Wed Nov 27, 2019 6:45 pm

I've been asked to box up a dutch driver board for someone. So while I had some time, I put the driver board on the bench this evening to measure the power and change the freq to what they wanted. It's wired up into a dummy load and using a stable 15v.

When switching it on, the board doesn't locked! The only way I've been able to get it to lock is having to press either the up button and then the down button or down button and then the up button.

Anyone got clue? They bought it sold as seen without any info. I've never used these boards before so bit of a loss.

It's the small blue driver with logo with a face giving the finger like the one attached but without the satcan.
You do not have the required permissions to view the files attached to this post.

ronald001
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 28
Joined: Sun Jan 17, 2016 1:49 pm
Location: Netherlands

Re: Dutch driver board issues

Post by ronald001 » Thu Nov 28, 2019 3:15 pm

This looks like an board made by RFhead, you should ask him

RF-Head
no manz can test innit
no manz can test innit
Posts: 170
Joined: Wed Oct 15, 2014 9:25 pm

Re: Dutch driver board issues

Post by RF-Head » Thu Nov 28, 2019 6:59 pm

Thats a old version but i will PM you

Post Reply