A basic Limiter

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
Albert H
proppa neck!
proppa neck!
Posts: 2705
Joined: Tue Apr 05, 2016 1:23 am

Re: A basic Limiter

Post by Albert H » Tue Oct 31, 2023 1:53 am

The OTA itself in both ICs is virtually identical, and output buffer appears to be a Darlington in both in the National Semi datasheets I've got here. The difference is in the linearising diode affair at the inputs of the OTAs. I've used both the '600 and '700 in the feedback attenuator topology with identical results.

I've also used them in another limiter topology that uses two audio paths with one inverted with respect to the other, and the two mixed by OTA gain cells. This further reduces the distortion contribution from the OTAs, and allows me to use level-dependant pre-emphasis (to squeeze the last possible dB out of the audio path!).
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

Post Reply