pira 5watt pll

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
output
big in da game.. trust
big in da game.. trust
Posts: 74
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Wed Oct 28, 2020 4:03 pm

it not ready yet im makeing it manhatton style .

User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: pira 5watt pll

Post by Electronically » Fri Oct 30, 2020 4:51 pm

If your struggling to lock your pira then just stretch out coil 1 a bit then you should be able to go to say 108 at top

Sent from my AMN-LX9 using Tapatalk


User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: pira 5watt pll

Post by Electronically » Fri Oct 30, 2020 4:52 pm

If your using 3.2mhz crystal then means 0.5 steps

Sent from my AMN-LX9 using Tapatalk


User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: pira 5watt pll

Post by Electronically » Fri Oct 30, 2020 5:05 pm

If so 3.2mhzcrysyal is used then make, sire you use pll32. Hex software. Or if its 6. 4mhz crystal then use pll64. Hex software

Sent from my AMN-LX9 using Tapatalk


User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Tue Nov 29, 2022 12:23 am

almost done pira 5w rev2022
You do not have the required permissions to view the files attached to this post.

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Thu Dec 01, 2022 4:44 pm

post the layout rigmo ?

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Thu Dec 01, 2022 4:47 pm

radium98 wrote: Thu Dec 01, 2022 4:44 pm post the layout rigmo ?
sure when is ready... i hope next week basic rev... upgraded soon

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Fri Dec 02, 2022 2:59 pm

Thanks rigmo

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Sat Dec 03, 2022 11:14 pm

PIRA 5w REV2022v1 pleas check before print¨¨!
You do not have the required permissions to view the files attached to this post.

XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: pira 5watt pll

Post by XXL » Tue Dec 06, 2022 9:16 pm

Have you built one yet rigmo ? Are the coils at the end those sqaure type with metal slug found online ?

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: pira 5watt pll

Post by Albert H » Wed Dec 07, 2022 12:01 am

Yes - the coils at the end would be the "Toko S18" type. Unfortunately, those wonderfully convenient inductors are getting hard to find. Toko stopped making them a few years ago. A couple of other companies made copies of the S18, so there are still some around. Toko used to make some marvellous components, including passive 15kHz lowpass filter modules, but seem to have gone in a different direction these days.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Wed Dec 07, 2022 11:21 am

Albert H wrote: Wed Dec 07, 2022 12:01 am Yes - the coils at the end would be the "Toko S18" type. Unfortunately, those wonderfully convenient inductors are getting hard to find. Toko stopped making them a few years ago. A couple of other companies made copies of the S18, so there are still some around. Toko used to make some marvellous components, including passive 15kHz lowpass filter modules, but seem to have gone in a different direction these days.
what does it look like originally? does it have a metal cover? how much induction is that?

XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: pira 5watt pll

Post by XXL » Wed Dec 07, 2022 12:26 pm

rigmo your the one who posted the design? surley you would know.

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Wed Dec 07, 2022 1:59 pm

XXL wrote: Wed Dec 07, 2022 12:26 pm rigmo your the one who posted the design? surley you would know.
knowledge is repetition,,, here, I'm not just asking for myself only

User avatar
yellowbeard
tower block dreamin
tower block dreamin
Posts: 305
Joined: Wed Jul 08, 2015 5:40 am

Re: pira 5watt pll

Post by yellowbeard » Wed Dec 07, 2022 4:11 pm

Le sigh.
https://www.pira.cz/entx4.htm
No swanky variable inductors in the original. You kids play nice now! :axe

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Wed Dec 07, 2022 4:51 pm

yellowbeard wrote: Wed Dec 07, 2022 4:11 pm Le sigh.
https://www.pira.cz/entx4.htm
No swanky variable inductors in the original. You kids play nice now! :axe
Incuctance of OSC PIRA 5W 120nH (301SS/N-0300 0.114uH 170 100 orange 3.5t 420300)
You do not have the required permissions to view the files attached to this post.

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: pira 5watt pll

Post by Albert H » Wed Dec 07, 2022 9:49 pm

Here's what the S18 looked like:
S18.jpg
You do not have the required permissions to view the files attached to this post.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: pira 5watt pll

Post by rigmo » Wed Dec 07, 2022 10:23 pm

Albert H wrote: Wed Dec 07, 2022 9:49 pm Here's what the S18 looked like:
S18.jpg
china
You do not have the required permissions to view the files attached to this post.

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: pira 5watt pll

Post by Albert H » Wed Dec 07, 2022 10:36 pm

That'll do it (as long as the slug is the right material!)
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
sinus trouble
proppa neck!
proppa neck!
Posts: 1410
Joined: Fri Aug 22, 2014 11:34 pm

Re: pira 5watt pll

Post by sinus trouble » Thu Dec 08, 2022 12:12 am

XXL wrote: Wed Dec 07, 2022 12:26 pm rigmo your the one who posted the design? surley you would know.
:lol: :lol: :lol:
I am as stupid as I look! :|

Post Reply