Alternative to using 2n4427 for 1 watt drivers
-
- proppa neck!
- Posts: 2776
- Joined: Tue Apr 05, 2016 1:23 am
Re: Alternative to using 2n4427 for 1 watt drivers
BFS22A is a great little transistor. At 12V, you get exactly 1 Watt out for 80 mW in. In my broadband circuit, it gives a perfect 72Ω match at 1 Watt.
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- Neckmin
- Posts: 337
- Joined: Fri Oct 17, 2014 10:35 am
-
- proppa neck!
- Posts: 2776
- Joined: Tue Apr 05, 2016 1:23 am
Re: Alternative to using 2n4427 for 1 watt drivers
Exactly! We still use UHF STLs. I just did a system that's concealed in the vestigial sideband of a local TV station! The customer's station is "quasi-legal", and they don't want their studio found. A combination of microwave and UHF got their STL requirements nicely sorted. The microwave stuff is spread spectrum PCM, so just looks like digital hash to the casual observer.
Until we supplied their new system, they were using a weird Band 1 set-up which worked in "burst mode". They'd send ~1 hour of programme as a short burst of data over about 90 seconds. The link transmitter had white noise modulating the baseband, with a subcarrier at 60 kHz that actually carried the data. The link receiver had a demodulator using a PLL to recover the data, then the logic fed a 4GB RAM module that the audio was assembled on to. This system was pretty secure, but was only capable of mono, and the audio bandwidth was limited to about 8kHz - not really "hi-fi".
The new system gives them full broadcast bandwidth stereo, and operates in "real time" allowing properly "live" programmes. The path length is only 5 km, but it's through a busy city, so it has to robustly ignore noise and interference. The UHF portion is really difficult to track because of the field strength of the TV station - when I did a similar trick in the 1980s, Gotts couldn't understand why he couldn't find the link frequency!
Covert link systems are great fun to design and implement. They're also good for studio security!
Until we supplied their new system, they were using a weird Band 1 set-up which worked in "burst mode". They'd send ~1 hour of programme as a short burst of data over about 90 seconds. The link transmitter had white noise modulating the baseband, with a subcarrier at 60 kHz that actually carried the data. The link receiver had a demodulator using a PLL to recover the data, then the logic fed a 4GB RAM module that the audio was assembled on to. This system was pretty secure, but was only capable of mono, and the audio bandwidth was limited to about 8kHz - not really "hi-fi".
The new system gives them full broadcast bandwidth stereo, and operates in "real time" allowing properly "live" programmes. The path length is only 5 km, but it's through a busy city, so it has to robustly ignore noise and interference. The UHF portion is really difficult to track because of the field strength of the TV station - when I did a similar trick in the 1980s, Gotts couldn't understand why he couldn't find the link frequency!
Covert link systems are great fun to design and implement. They're also good for studio security!
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
- rigmo
- tower block dreamin
- Posts: 461
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Alternative to using 2n4427 for 1 watt drivers
2n3553 4-5W out (mrf237 any tray?)
You do not have the required permissions to view the files attached to this post.
- teckniqs
- proppa neck!
- Posts: 3179
- Joined: Thu Aug 21, 2014 11:37 am
Re: Alternative to using 2n4427 for 1 watt drivers
MRF237 connects up slightly different to the 2n3553, the collector and emitter connection points are the opposite way around.
....That is why on the old RDVV boards they had 2 holes drilled in to connect the base for output device, one hole at the front and one at the back, depending on what way the transistor connects up.![smiley :tup](./images/smilies/me.gif)
....That is why on the old RDVV boards they had 2 holes drilled in to connect the base for output device, one hole at the front and one at the back, depending on what way the transistor connects up.
![smiley :tup](./images/smilies/me.gif)
- rigmo
- tower block dreamin
- Posts: 461
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Alternative to using 2n4427 for 1 watt drivers
teckniqs wrote: ↑Fri Jun 26, 2020 8:59 pm MRF237 connects up slightly different to the 2n3553, the collector and emitter connection points are the opposite way around.
....That is why on the old RDVV boards they had 2 holes drilled in to connect the base for output device, one hole at the front and one at the back, depending on what way the transistor connects up.![]()
You do not have the required permissions to view the files attached to this post.
-
- proppa neck!
- Posts: 2776
- Joined: Tue Apr 05, 2016 1:23 am
Re: Alternative to using 2n4427 for 1 watt drivers
Don't connect that mess to an aerial! There will be generous amounts of harmonic energy. There will also be spurs at the crystal frequency either side of the carrier - probably on an inconvenient frequency!
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
-
- proppa neck!
- Posts: 919
- Joined: Fri Aug 26, 2016 7:01 pm
Re: Alternative to using 2n4427 for 1 watt drivers
Albert H is wright in his answer.terrible harmonics and spurs will be spread .
- rigmo
- tower block dreamin
- Posts: 461
- Joined: Wed Jan 30, 2019 9:35 pm
Re: Alternative to using 2n4427 for 1 watt drivers
sure albert and radium but im interested for final stage of 2n3553 and matching....
-
- proppa neck!
- Posts: 2776
- Joined: Tue Apr 05, 2016 1:23 am
Re: Alternative to using 2n4427 for 1 watt drivers
It's NOT the way to do it!
Get Bostian, Raab & Krause's wonderful "Semiconductor RF Power" book. It gives you all the formulae and the principles you should follow when designing a PA stage. You'll need some mathematical ability (and if you haven't got mathematical ability, you should forget engineering and take up needlepoint or something).
Get Bostian, Raab & Krause's wonderful "Semiconductor RF Power" book. It gives you all the formulae and the principles you should follow when designing a PA stage. You'll need some mathematical ability (and if you haven't got mathematical ability, you should forget engineering and take up needlepoint or something).
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Alternative to using 2n4427 for 1 watt drivers
Are you sure it’s called ‘semiconductor RF power I could only find a book by all 3 of them called ‘solidstate radio engineering’?Albert H wrote: ↑Mon Jun 29, 2020 4:26 am It's NOT the way to do it!
Get Bostian, Raab & Krause's wonderful "Semiconductor RF Power" book. It gives you all the formulae and the principles you should follow when designing a PA stage. You'll need some mathematical ability (and if you haven't got mathematical ability, you should forget engineering and take up needlepoint or something).
- teckniqs
- proppa neck!
- Posts: 3179
- Joined: Thu Aug 21, 2014 11:37 am
Re: Alternative to using 2n4427 for 1 watt drivers
https://books.google.co.uk/books?id=HrD ... er&f=falseBton-FM wrote: ↑Mon Jun 29, 2020 10:16 amAre you sure it’s called ‘semiconductor RF power I could only find a book by all 3 of them called ‘solidstate radio engineering’?Albert H wrote: ↑Mon Jun 29, 2020 4:26 am It's NOT the way to do it!
Get Bostian, Raab & Krause's wonderful "Semiconductor RF Power" book. It gives you all the formulae and the principles you should follow when designing a PA stage. You'll need some mathematical ability (and if you haven't got mathematical ability, you should forget engineering and take up needlepoint or something).
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Alternative to using 2n4427 for 1 watt drivers
thanksteckniqs wrote: ↑Mon Jun 29, 2020 10:42 amhttps://books.google.co.uk/books?id=HrD ... er&f=falseBton-FM wrote: ↑Mon Jun 29, 2020 10:16 amAre you sure it’s called ‘semiconductor RF power I could only find a book by all 3 of them called ‘solidstate radio engineering’?Albert H wrote: ↑Mon Jun 29, 2020 4:26 am It's NOT the way to do it!
Get Bostian, Raab & Krause's wonderful "Semiconductor RF Power" book. It gives you all the formulae and the principles you should follow when designing a PA stage. You'll need some mathematical ability (and if you haven't got mathematical ability, you should forget engineering and take up needlepoint or something).
![smiley :tup](./images/smilies/me.gif)
-
- proppa neck!
- Posts: 2776
- Joined: Tue Apr 05, 2016 1:23 am
Re: Alternative to using 2n4427 for 1 watt drivers
My ageing memory... You're right. It's "Solid State Radio Engineering".
Here's my copy!
Here's my copy!
You do not have the required permissions to view the files attached to this post.
"Why is my rig humming?"
"Because it doesn't know the words!"![Wink ;)](./images/smilies/icon_e_wink.gif)
"Because it doesn't know the words!"
![Wink ;)](./images/smilies/icon_e_wink.gif)
- yellowbeard
- tower block dreamin
- Posts: 308
- Joined: Wed Jul 08, 2015 5:40 am
- reverend
- no manz can test innit
- Posts: 235
- Joined: Sat Jul 25, 2020 12:03 pm
Re: Alternative to using 2n4427 for 1 watt drivers
Has anyone tried the 2SC2851? These seem good for a Watt, though I would imagine they're more difficult to heatsink being a TO-92 package.
Rev
Rev
if it ain't broke, keep tweaking
- Zozo
- tower block dreamin
- Posts: 256
- Joined: Sun Feb 14, 2021 9:33 am
- Location: 3rd rock from the Sun
Re: Alternative to using 2n4427 for 1 watt drivers
Not tried one of those, I think you can get heatsinks for TO-92 case.
I've moved on now with my project, and gone with the MRF4427. After speaking with someone who uses them regularly, it seems they need very little to no heatsinking at all. They are so much more efficient compared to the 2n4427.
Sneak preview.
You do not have the required permissions to view the files attached to this post.
Give me a AM transmitter with things that glow any day.
-
- proppa neck!
- Posts: 612
- Joined: Sun Sep 07, 2014 4:20 pm
Re: Alternative to using 2n4427 for 1 watt drivers
Nice one fella.
I like reading now & again, but I like it even better when it's free.
![smiley :tup](./images/smilies/me.gif)
- Bton-FM
- tower block dreamin
- Posts: 463
- Joined: Sun Jun 16, 2019 2:55 pm
- Location: Beside the seaside
Re: Alternative to using 2n4427 for 1 watt drivers
Why have you included the 2.2 Ohm resistor and 1nF capacitor to ground but then grounded all the other pins? Why don't you do away with the resistor and capacitor and connect the pin directly to ground like you have done with the other pins.Zozo wrote: ↑Fri Mar 26, 2021 11:42 amNot tried one of those, I think you can get heatsinks for TO-92 case.
I've moved on now with my project, and gone with the MRF4427. After speaking with someone who uses them regularly, it seems they need very little to no heatsinking at all. They are so much more efficient compared to the 2n4427.
Sneak preview.
MK3+.JPG
Also, the gain an order of magnitude better than the 2N4427! The datasheet specifies 18dB of gain @ 175MHz with 15mW input for 1 Watt out so the ~100mW out of the driver stage is going to be way too much. You could to add an attenuator between the 82pF capacitor after the transformer and the base of the MRF4427 or change the resistors around the MPSH10 so that it outputs less power.
- Zozo
- tower block dreamin
- Posts: 256
- Joined: Sun Feb 14, 2021 9:33 am
- Location: 3rd rock from the Sun
Re: Alternative to using 2n4427 for 1 watt drivers
I know what you mean in regards to the 2.2 ohm resister and bypass capacitor. All I've done at the moment is change out the 2n4427 for the MRF4427.Bton-FM wrote: ↑Sat Mar 27, 2021 12:21 amWhy have you included the 2.2 Ohm resistor and 1nF capacitor to ground but then grounded all the other pins? Why don't you do away with the resistor and capacitor and connect the pin directly to ground like you have done with the other pins.Zozo wrote: ↑Fri Mar 26, 2021 11:42 amNot tried one of those, I think you can get heatsinks for TO-92 case.
I've moved on now with my project, and gone with the MRF4427. After speaking with someone who uses them regularly, it seems they need very little to no heatsinking at all. They are so much more efficient compared to the 2n4427.
Sneak preview.
MK3+.JPG
Also, the gain an order of magnitude better than the 2N4427! The datasheet specifies 18dB of gain @ 175MHz with 15mW input for 1 Watt out so the ~100mW out of the driver stage is going to be way too much. You could to add an attenuator between the 82pF capacitor after the transformer and the base of the MRF4427 or change the resistors around the MPSH10 so that it outputs less power.
With the Rev 1a board I used for the first tests, I ended up with having to cut 1 track and introduce a resister. These mods have made there way over to the new revision boards which should be here on Tuesday next week. Once I've built one and tested it, I should finally and "hopefully" be able to say complete on that revision.
This newer revision is yet again another experiment, which I'm sure without doubt will require a track or two to be cut and the odd bodged in component in true "Dead Bug" fashion. I'll possibly just short out the 2.2 ohm and do away with the 1nf bypass, I may lose a few MRF4427's in the process as I play with the design. But the MRF4427 is a completely new animal to me, so it's all an uncharted area.
I know the datasheet can probably provide all the required information to develop a good working output circuit, however the results from the practical experiment will still need to be assessed.
Give me a AM transmitter with things that glow any day.