MRF300AN RF Power Fet

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
RF-Head
tower block dreamin
tower block dreamin
Posts: 271
Joined: Wed Oct 15, 2014 9:25 pm

Re: MRF300AN RF Power Fet

Post by RF-Head » Sun Jun 28, 2020 8:17 pm

No Sorry not sharing schematics!

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: MRF300AN RF Power Fet

Post by rigmo » Sun Jun 28, 2020 10:03 pm

RF-Head wrote: Thu Jun 25, 2020 5:16 pm
So if you want to know something please PM
I send you PM

RF-Head
tower block dreamin
tower block dreamin
Posts: 271
Joined: Wed Oct 15, 2014 9:25 pm

Re: MRF300AN RF Power Fet

Post by RF-Head » Sun Jun 28, 2020 11:11 pm

See above
No sorry not sharing schematics!!

User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 459
Joined: Wed Jan 30, 2019 9:35 pm

Re: MRF300AN RF Power Fet

Post by rigmo » Mon Jun 29, 2020 8:35 pm

RF-Head wrote: Sun Jun 28, 2020 11:11 pm See above
No sorry not sharing schematics!!
how much cost pcb? diy kit ?

nrgkits.nz
Neckmin
Neckmin
Posts: 337
Joined: Fri Oct 17, 2014 10:35 am

Re: MRF300AN RF Power Fet

Post by nrgkits.nz » Wed Jul 01, 2020 9:15 pm

Its not too difficult to come up with your own schematic for these devices, the output impedance at 50v/300w is going to be very similar to the output impedance at 13.8v/15w as per Albert's formula (vcc squared / 2 * power out).

Have a look at an existing schematic for the RD15HVF1 and use the output matching from this. Tweak it slightly for the best match, and of course you'll also need to use thick wire wound inductors to deal with the power - the thicker the better as you've got less skin effect, less resistance, less power wasted as heat.

Marcel
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 47
Joined: Mon Oct 09, 2017 10:35 pm
Location: The Netherlands

Re: MRF300AN RF Power Fet

Post by Marcel » Thu Jul 02, 2020 6:41 pm

Or the MRF101AN for FM broadcast is on internet/youtube and even a NXP design contest has won.

This RF mosfet is also for 50 volt supply voltage and with 1 Watt input it ouputs about 100 Watts.

(Dutch RF shop has the schematic and the PCB on his site).

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: MRF300AN RF Power Fet

Post by Bton-FM » Thu Jul 02, 2020 7:27 pm

Marcel wrote: Thu Jul 02, 2020 6:41 pm Or the MRF101AN for FM broadcast is on internet/youtube and even a NXP design contest has won.

This RF mosfet is also for 50 volt supply voltage and with 1 Watt input it ouputs about 100 Watts.

(Dutch RF shop has the schematic and the PCB on his site).
It’s Nick from enigma shop’s design.

User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3176
Joined: Thu Aug 21, 2014 11:37 am

Re: MRF300AN RF Power Fet

Post by teckniqs » Thu Jul 02, 2020 7:30 pm


Post Reply