Alright Necks, I have one of Alberts designs for a linkboard I found in another post on this forum and I'm trying to implement it into Eagle but its a ball ache, most of the components are in size and not the actual value I want. I did electronics at school (years ago) and the software I used you could knock it up in a couple of mins although I forget what its called. Can anyone suggest something that isn't as "pro" as Eagle.
Bigup!
Schematic/PCB Software
-
BaconSarnie
- who u callin ne guy bruv
- Posts: 25
- Joined: Fri Oct 03, 2014 6:07 pm
Schematic/PCB Software
"I see'z ya!"
-
s2000
Re: Schematic/PCB Software
I use this....
http://www.expresspcb.com/
Works quite well although it is limited, also there is some new software you can buy which will read the expresspcb format allowing you to use a different pcb manufacturer..
http://www.robotroom.com/CopperConnection/
Having said that the express pcbs are made really fast and are always good quality.
http://www.expresspcb.com/
Works quite well although it is limited, also there is some new software you can buy which will read the expresspcb format allowing you to use a different pcb manufacturer..
http://www.robotroom.com/CopperConnection/
Having said that the express pcbs are made really fast and are always good quality.