Bias Voltage of SD2931 ??

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Bias Voltage of SD2931 ??

Post by XXL » Sun Apr 10, 2022 11:16 am

Datasheet says 100ma which is about 2.5v. Is this correct before I apply drive ? Iv never used this device before.

Thanks
Top
nrgkits.nz
Neckmin
Neckmin
Posts: 337
Joined: Fri Oct 17, 2014 10:35 am

Re: Bias Voltage of SD2931 ??

Post by nrgkits.nz » Sun Apr 10, 2022 12:01 pm

Connect an amp meter to the PA, slowly increase the bias starting from 0v until you see current being drawn, keep increasing the bias until you see 100mA on the amp meter
Top
XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: Bias Voltage of SD2931 ??

Post by XXL » Sun Apr 10, 2022 12:17 pm

Thanks man.
Top
Post Reply

Return to “Anorak Corner”