pira 5watt pll

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

pira 5watt pll

Post by output » Sat Jun 20, 2020 11:09 pm

hello as any one had ago at makeing this if so does the tsa5511 need programming .
Screenshot_20200620-225742_Chrome.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 349
Joined: Sun Jun 16, 2019 2:55 pm
Location: Brighton

Re: pira 5watt pll

Post by Bton-FM » Sun Jun 21, 2020 10:07 am

No you program the pic that communicates with the 5511 via I2C.

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Sun Jun 21, 2020 12:12 pm

thanks the reply 👍

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Mon Jun 22, 2020 7:40 am

here it is i have an output of 3,5w on double side ,if you do it and do get more output let e know ,i tried voltage between 12 to 13,8 same ,sound impecable to ,my transistor are genuine .the diode i use were bb105 .done 3 years ago
You do not have the required permissions to view the files attached to this post.

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Tue Jun 23, 2020 1:12 am

ok i will let you no if i do

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Tue Jun 23, 2020 1:32 am

try this transistor 2n3375 push 1 to 2 watt in and get 10 watt out easy max power is 11 watts from what i remmber i was runing 12 to 16 volts ...2n3375 i had it as the final stage in a small mitter i had ..way back ..

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Tue Jun 23, 2020 5:25 pm





enjoy the real time sound direct from a tuner to tuner test

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Tue Jun 23, 2020 5:35 pm

i only have c1946a any pcb wide band is acceptable thanks if no no problem,i have no others choices

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Tue Jun 23, 2020 8:03 pm

ok are they your videos or are they random videos on you tube ..

Albert H
proppa neck!
proppa neck!
Posts: 1710
Joined: Tue Apr 05, 2016 1:23 am

Re: pira 5watt pll

Post by Albert H » Wed Jun 24, 2020 1:16 am

output wrote:
Tue Jun 23, 2020 1:32 am
try this transistor 2n3375 push 1 to 2 watt in and get 10 watt out easy max power is 11 watts from what i remmber i was runing 12 to 16 volts ...2n3375 i had it as the final stage in a small mitter i had ..way back ..
2N3375 is a 28V device. Running them at 12V gets you practically no useful gain at all! I used to use them as drivers - 2N3866 for 100mW in, 1 Watt out, into a 2N3375, then a 587BLY for the output. 90 Watts out every time at 27V supply (the transformers I used used to droop under load). That three-transistor PA was used by almost every station in the 80s! Give the PA 33V, and you could get as much as 120 Watts out, but they were really touchy at that kind of power.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Wed Jun 24, 2020 5:23 pm

@output my video bro ,listen arabic music this .I post them to let you take an idea ,fellow ,because i see no one put anything on the web ,but i see few done them .Should i take a picture to me in front of them or say youre nickname ?to get you know thats me ,or i post erronic infos like some people who do it ...?

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Wed Jun 24, 2020 11:27 pm

radium98 what crystal did you use the 3.2mhz or 6.4 mhz crystal.

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Thu Jun 25, 2020 5:23 pm

3.2 mhz for 50khz step.i did two txer and never use them yet ,only for short test,one in single side and other in double side .As you can see you cannot reach any other videos than mine ,and the quality seems good ,and pass the rds signal clearly .did not test with stereo coder ,i use a soft version wich seems pretty clean digitaly coded then a hardware one at low power ,surely rated at high power i prefer a hardware st version.good luck and let us now for result.

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Thu Jun 25, 2020 10:05 pm

ok ive installed the 6.4 mghz hex file and the 6.4 crystal still waiting on some more parts if the 6.4 mghz crystal dont work out i will have to try the 3.2 mghz crystal cant seem to find any 3.2 mghz crytals on line..

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Thu Jun 25, 2020 10:07 pm

sorry for the mis spell phone has its own mind i meant mhz .

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Sat Jun 27, 2020 8:10 am

it must work with step of 100khz ,what do you use transistor at output ?

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Sat Jun 27, 2020 11:44 am

it still in the makeing once its made and i no its working ok then i will change transistors..im still waiting on some parts from over seas so next month or so i will send u a update ..

radium98
proppa neck!
proppa neck!
Posts: 514
Joined: Fri Aug 26, 2016 7:01 pm

Re: pira 5watt pll

Post by radium98 » Sat Jun 27, 2020 8:54 pm

if you can put some pictures to get inspired ? of the work and will make an attestation ,of what should and should not be done ,thanks.

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Fri Jul 24, 2020 12:13 am

20200723_235244.jpg
You do not have the required permissions to view the files attached to this post.

output
big in da game.. trust
big in da game.. trust
Posts: 72
Joined: Fri Nov 22, 2019 9:55 pm

Re: pira 5watt pll

Post by output » Fri Jul 24, 2020 12:21 am

can anyone help?im stuck on wireing the module lcd..so far ive got vss as ground,vdd as + volts,vo as pin 3,and A as led anode.and k as cathode been looking on internet but not found alot if anyone could help that would be great..

Post Reply