Mrf9180 Keeps blowing!!

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3176
Joined: Thu Aug 21, 2014 11:37 am

Re: RE: Re: Mrf9180 Keeps blowing!!

Post by teckniqs » Mon Apr 13, 2020 12:32 am

Bton-FM wrote: Sun Apr 12, 2020 10:50 pm

whats a sensible output power to run MRF9180 and MRF186 then?
MRF9180 - 150w

MRF186 - 100w

nrgkits.nz
Neckmin
Neckmin
Posts: 337
Joined: Fri Oct 17, 2014 10:35 am

Re: Mrf9180 Keeps blowing!!

Post by nrgkits.nz » Mon Apr 13, 2020 1:29 am

The MRF186, I would set it at 100W - it’s always best to under run them a little. The MRF9180 (if you get lucky and the gates don’t pop) run it no more than 150W, preferably 130 to 140, the difference in field strength will be unnoticeable.

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 Keeps blowing!!

Post by Bton-FM » Mon Apr 13, 2020 12:18 pm

Does anyone happen to have the pcb files for these amps?I know there are ones for 7£ on Ebay but that seems a bit steep when I could get 10 of them knocked out for 7£ from china.

nrgkits.nz
Neckmin
Neckmin
Posts: 337
Joined: Fri Oct 17, 2014 10:35 am

Re: Mrf9180 Keeps blowing!!

Post by nrgkits.nz » Mon Apr 13, 2020 1:30 pm

I copied the original PCB and modified it somewhat, I’ll post up the files tomorrow. However with the price of these kits being so cheap out of China it’s probably cheaper to negotiate a bulk purchase from the Chinese vendor.

User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: RE: Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Mon Apr 13, 2020 3:03 pm

Electronically wrote: Sun Apr 12, 2020 10:23 pm If there fake and work it does the job. It's just basically a copy of the original.
OK but some of these fake ones don't give out full power.
I got these 3 from Aliexpress @ €9.19 each - Seller: AIICKING Store
They only produced 20W RF output.
MRF9180 x 3 Fakes from AliExpress-S.jpg
My Pic

Another Aliexpress buyer had the same problem.
MRF9180 - AliExpress - Aliexpress Buyer = Fakes #RR1627E-S.jpg
Note the production number under MRF9180 are the same > RR1627E
So... these are definitely a bad batch :cry:
Electronically wrote: Sun Apr 12, 2020 10:23 pm Reason these copy's or originals don't last long is because most folk crank up the Volts to make it go at boiling point.
I replaced the MRF9180 with a genuine one in November 2019, it's been running at 26V @ 8A for 16hrs a day at a reasonable temperature ever since.
MRF9180 @ 26V-8A = 150W Output.JPG
:tup
You do not have the required permissions to view the files attached to this post.
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: RE: Re: RE: Re: Mrf9180 Keeps blowing!!

Post by Electronically » Mon Apr 13, 2020 3:14 pm

BriansBrain wrote:
Electronically wrote: Sun Apr 12, 2020 10:23 pm If there fake and work it does the job. It's just basically a copy of the original.
OK but some of these fake ones don't give out full power.
I got these 3 from Aliexpress @ €9.19 each - Seller: AIICKING Store
They only produced 20W RF output.
MRF9180 x 3 Fakes from AliExpress-S.jpg
My Pic

Another Aliexpress buyer had the same problem.
MRF9180 - AliExpress - Aliexpress Buyer = Fakes #RR1627E-S.jpg
Note the production number under MRF9180 are the same > RR1627E
So... these are definitely a bad batch :cry:
Electronically wrote: Sun Apr 12, 2020 10:23 pm Reason these copy's or originals don't last long is because most folk crank up the Volts to make it go at boiling point.
I replaced the MRF9180 with a genuine one in November 2019, it's been running at 26V @ 8A for 16hrs a day at a reasonable temperature ever since.
MRF9180 @ 26V-8A = 150W Output.JPG
:tup
Brian I don't believe you have been running these 16 hours a day

Sent from my AMN-LX9 using Tapatalk



User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: RE: Re: RE: Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Mon Apr 13, 2020 3:39 pm

Electronically wrote: Mon Apr 13, 2020 3:14 pm Brian I don't believe you have been running these 16 hours a day
Actually it's 16 hours and +/- 15 minutes a day :whistle

Every day I get up at 7:45 first I have a pee :o
Then go into Brian's Studio / Workshop and turn all his computers on :smoke ,
Then I go up one floor to Brian's RF rack which is in the little roof house.
RF rack top of stairs.JPG
So Brian's RF gear gets turned on about 7:52 ;)

Then...
Every night I select a slow track for his last tune of the day to play after the BBC news at Midnight.
Then trundle up the stairs once again and turn the RF rack OFF
At +/- 12:08

:tup
You do not have the required permissions to view the files attached to this post.
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 Keeps blowing!!

Post by Bton-FM » Mon Apr 13, 2020 3:49 pm

@BriansBrain do you sprinke magic dust on the gates of the FET before you set the bias?

User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Mon Apr 13, 2020 6:15 pm

Bton-FM wrote: Mon Apr 13, 2020 3:49 pm @BriansBrain do you sprinke magic dust on the gates of the FET before you set the bias?
Nah... but I don't set the bias using a Voltage reading ;)

I was given instructions from an old friend of mine that was big in the pirate radio game in Merseyside back in the 80's :whistle

This is what he told me...
If your board has a pre set pot to adjust the quiescent current then connect the supply voltage
Under no RF drive conditions adjust the drain quiescent current for a total of around 300mA.
This device is a dual FET so 150mA per drain.
This is a good starting point for class B biasing and depending on your input drive and how it is coupled
to the gate you will need to experiment with the bias current, i wouldn't go much over 400mA total though.
Connect your power meter in line with a well matched load and you are looking for a max power of around
180W, I wouldn't go much above that as the class B biasing will return an efficiency of around 78%.
Don't try and push the device for maximum ratings.
If you are trying to squeeze 200W from the device then any miss-matches could send the device over the edge.
Hope this is of help mate but there is no one answer, it always involved a little experimentation.
I have actually set mine to a quiescent board current for a total of around 225mA When Cold +/- 21C°
As I have found when the MRF9180 is HOT the quiescent board current without ant RF drive is around 400mA
He also told me, if it says 26V Max on the data sheet then it will be OK at 26V

I drive the 150W linear using one of these boards from ebay it has an adjustable power output.
15w RF Pallet Adjustable PWR Out Front-S.jpg
Every morning I turn the 150W linear on with No RF Drive and I see +/- 220mA on the current meter on the front of the amp.
then turn up the little 15W linear until the 150W linear reaches 8A then it's set for the day.
15w RF Pallet Adjustable PWR Out.jpg
:tup
You do not have the required permissions to view the files attached to this post.
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: RE: Re: RE: Re: Mrf9180 Keeps blowing!!

Post by Electronically » Mon Apr 13, 2020 7:48 pm

BriansBrain wrote:
Electronically wrote: Sun Apr 12, 2020 10:23 pm If there fake and work it does the job. It's just basically a copy of the original.
OK but some of these fake ones don't give out full power.
I got these 3 from Aliexpress @ €9.19 each - Seller: AIICKING Store
They only produced 20W RF output.
MRF9180 x 3 Fakes from AliExpress-S.jpg
My Pic

Another Aliexpress buyer had the same problem.
MRF9180 - AliExpress - Aliexpress Buyer = Fakes #RR1627E-S.jpg
Note the production number under MRF9180 are the same > RR1627E
So... these are definitely a bad batch :cry:
Electronically wrote: Sun Apr 12, 2020 10:23 pm Reason these copy's or originals don't last long is because most folk crank up the Volts to make it go at boiling point.
I replaced the MRF9180 with a genuine one in November 2019, it's been running at 26V @ 8A for 16hrs a day at a reasonable temperature ever since.
MRF9180 @ 26V-8A = 150W Output.JPG
:tup
Brian see all those transistors you've shown.my question is why have you got 3 genuine chips that you have used are they all blown? .

Sent from my AMN-LX9 using Tapatalk


User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: RE: Re: RE: Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Mon Apr 13, 2020 9:05 pm

Electronically wrote: Mon Apr 13, 2020 7:48 pm Brian see all those transistors you've shown.my question is why have you got 3 genuine chips that you have used are they all blown? .
The one in the pics are not genuine chips :cry:

Those three in the picture I got from Aliexpress @ €9.19 each - Seller: AIICKING Store
That only produced 20W RF output are obviously Fakes... and bad ones at that :shock:

They are not blown just useless at only 20W output :|

Look here >>> viewtopic.php?f=11&t=2373
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: RE: Re: RE: Re: RE: Re: Mrf9180 Keeps blowing!!

Post by Electronically » Mon Apr 13, 2020 9:17 pm

BriansBrain wrote:
Electronically wrote: Mon Apr 13, 2020 7:48 pm Brian see all those transistors you've shown.my question is why have you got 3 genuine chips that you have used are they all blown? .
The one in the pics are not genuine chips :cry:

Those three in the picture I got from Aliexpress @ €9.19 each - Seller: AIICKING Store
That only produced 20W RF output are obviously Fakes... and bad ones at that :shock:

They are not blown just useless at only 20W output :|

Look here >>> viewtopic.php?f=11&t=2373
Lol I was tricking you to see if you would slip up with the fake to genuine ones. OK so it's official they Aliexpress chips are only doing 20 Watts. I've never tried Aliexpress chips to be honest.

Sent from my AMN-LX9 using Tapatalk



Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: Mrf9180 Keeps blowing!!

Post by Albert H » Tue Apr 14, 2020 2:35 am

MRF9180 is best (in the boards I've used) at 21V with just over 2.2W of drive for 135 Watts out. Efficiency is in the 70% - 75% range. IIn the early days, I steamed a couple of them to over 200 Watts, but they died pretty quickly (despite being genuine ones). I messed with them a lot in the Chinese cheap boards and found the 21V / 135W to be about the most reliable point.

The MRF186 is OK at 90 Watts into a horrible load (a blown-down aerial!).
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

User avatar
Electronically
tower block dreamin
tower block dreamin
Posts: 431
Joined: Wed May 13, 2015 11:43 am

Re: RE: Re: Mrf9180 Keeps blowing!!

Post by Electronically » Tue Apr 14, 2020 7:11 am

Albert H wrote:MRF9180 is best (in the boards I've used) at 21V with just over 2.2W of drive for 135 Watts out. Efficiency is in the 70% - 75% range. IIn the early days, I steamed a couple of them to over 200 Watts, but they died pretty quickly (despite being genuine ones). I messed with them a lot in the Chinese cheap boards and found the 21V / 135W to be about the most reliable point.

The MRF186 is OK at 90 Watts into a horrible load (a blown-down aerial!).
Albert your absolutely correct on this 21volts is best. Any higher it will damage.

Sent from my AMN-LX9 using Tapatalk


RF-Head
tower block dreamin
tower block dreamin
Posts: 271
Joined: Wed Oct 15, 2014 9:25 pm

Re: Mrf9180 Keeps blowing!!

Post by RF-Head » Tue Apr 14, 2020 8:32 am

First the driver that you use ia not stable and can easy generate spurr and only working "clean"on full power
This little amp will produce 15W if you only put your finger in the input of the amp
Maybe this is the problem
i have had many 9180 on the workbench and all working day after day
Also a other thing can be static from you antenna...
Why not buying a good amp and stay away of the china boards?
I see that you use the 15W driver but what is your output of the PLL osc?

User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 3176
Joined: Thu Aug 21, 2014 11:37 am

Re: Mrf9180 Keeps blowing!!

Post by teckniqs » Tue Apr 14, 2020 10:35 am

RF-Head wrote: Tue Apr 14, 2020 8:32 am First the driver that you use ia not stable and can easy generate spurr and only working "clean"on full power
This little amp will produce 15W if you only put your finger in the input of the amp
Maybe this is the problem
i have had many 9180 on the workbench and all working day after day
Also a other thing can be static from you antenna...
Why not buying a good amp and stay away of the china boards?
I see that you use the 15W driver but what is your output of the PLL osc?
Maybe he has changed it to the RD06HVF1.

ronald001
big in da game.. trust
big in da game.. trust
Posts: 95
Joined: Sun Jan 17, 2016 1:49 pm
Location: Netherlands

Re: Mrf9180 Keeps blowing!!

Post by ronald001 » Tue Apr 14, 2020 11:17 am

BriansBrain wrote: Mon Apr 13, 2020 6:15 pm
Bton-FM wrote: Mon Apr 13, 2020 3:49 pm @BriansBrain do you sprinke magic dust on the gates of the FET before you set the bias?
Nah... but I don't set the bias using a Voltage reading ;)

I was given instructions from an old friend of mine that was big in the pirate radio game in Merseyside back in the 80's :whistle

This is what he told me...
If your board has a pre set pot to adjust the quiescent current then connect the supply voltage
Under no RF drive conditions adjust the drain quiescent current for a total of around 300mA.
This device is a dual FET so 150mA per drain.
This is a good starting point for class B biasing and depending on your input drive and how it is coupled
to the gate you will need to experiment with the bias current, i wouldn't go much over 400mA total though.
I have actually set mine to a quiescent board current for a total of around 225mA When Cold +/- 21C°
As I have found when the MRF9180 is HOT the quiescent board current without ant RF drive is around 400mA
He also told me, if it says 26V Max on the data sheet then it will be OK at 26V



:tup

Idq of a 9180 is 1400mA

Image

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 463
Joined: Sun Jun 16, 2019 2:55 pm
Location: Beside the seaside

Re: Mrf9180 Keeps blowing!!

Post by Bton-FM » Tue Apr 14, 2020 11:44 am

ronald001 wrote: Tue Apr 14, 2020 11:17 am
BriansBrain wrote: Mon Apr 13, 2020 6:15 pm
Bton-FM wrote: Mon Apr 13, 2020 3:49 pm @BriansBrain do you sprinke magic dust on the gates of the FET before you set the bias?
Nah... but I don't set the bias using a Voltage reading ;)

I was given instructions from an old friend of mine that was big in the pirate radio game in Merseyside back in the 80's :whistle

This is what he told me...
If your board has a pre set pot to adjust the quiescent current then connect the supply voltage
Under no RF drive conditions adjust the drain quiescent current for a total of around 300mA.
This device is a dual FET so 150mA per drain.
This is a good starting point for class B biasing and depending on your input drive and how it is coupled
to the gate you will need to experiment with the bias current, i wouldn't go much over 400mA total though.
I have actually set mine to a quiescent board current for a total of around 225mA When Cold +/- 21C°
As I have found when the MRF9180 is HOT the quiescent board current without ant RF drive is around 400mA
He also told me, if it says 26V Max on the data sheet then it will be OK at 26V



:tup

Idq of a 9180 is 1400mA

Image
could be to do with the ft of 880Mhz

User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Tue Apr 14, 2020 12:32 pm

RF-Head wrote: Tue Apr 14, 2020 8:32 am First the driver that you use ia not stable and can easy generate spurr and only working "clean"on full power
This little amp will produce 15W if you only put your finger in the input of the amp
Maybe this is the problem
i have had many 9180 on the workbench and all working day after day
Also a other thing can be static from you antenna...
Why not buying a good amp and stay away of the china boards?
I see that you use the 15W driver but what is your output of the PLL osc?
Well I use that board because of the variable RF output, it is stable, and does not produce spurr at low power :)
I only use it at low power to drive the MRF9180 board :smoke

I drive that with 15W a Tugicom TX180 1W exciter...
Tugicom TX180 1W exciter.JPG
I drive the Tugicom at MPX from Breakaway Broadcast 0.90.69

I don't have a problem....
My system is working @ 150w 16hrs a day... :P every day :whistle

It's the original poster of this thread has the problem :smoke
You do not have the required permissions to view the files attached to this post.
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

User avatar
BriansBrain
tower block dreamin
tower block dreamin
Posts: 455
Joined: Sat Jun 08, 2019 1:22 pm
Location: Gran Canaria, Spain. One of the 7 islands off the N.W. coast of Africa.
Contact:

Re: Mrf9180 Keeps blowing!!

Post by BriansBrain » Tue Apr 14, 2020 12:38 pm

teckniqs wrote: Tue Apr 14, 2020 10:35 am
RF-Head wrote: Tue Apr 14, 2020 8:32 am First the driver that you use ia not stable and can easy generate spurr and only working "clean"on full power
This little amp will produce 15W if you only put your finger in the input of the amp
Maybe this is the problem
i have had many 9180 on the workbench and all working day after day
Also a other thing can be static from you antenna...
Why not buying a good amp and stay away of the china boards?
I see that you use the 15W driver but what is your output of the PLL osc?
Maybe he has changed it to the RD06HVF1.
Nope I use Genuine RD15HVF1 and I have not had any problems with it.
Mind you I only use this boards at low power for it's variable output capability :smoke
''Radio Brian'' - One of the Most Unique English Speaking Radio Stations in the Canaries... Possibly the World.

Post Reply