Old Rig

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 2677
Joined: Thu Aug 21, 2014 11:37 am

Re: Old Rig

Post by teckniqs » Sat Dec 07, 2019 6:55 am

Old Roger 50w rig from around 1986/87

Image

radium98
tower block dreamin
tower block dreamin
Posts: 432
Joined: Fri Aug 26, 2016 7:01 pm

Re: Old Rig

Post by radium98 » Sat Dec 07, 2019 7:25 am

nice ,beutiful ,clean and simple

Banus_radio
no manz can test innit
no manz can test innit
Posts: 119
Joined: Wed Aug 24, 2016 9:58 pm

Re: Old Rig

Post by Banus_radio » Sun Dec 08, 2019 8:22 pm

teckniqs wrote:
Sat Dec 07, 2019 6:55 am
Old Roger 50w rig from around 1986/87

Image
Wrong, Thats a TX-35 built buy Steve B******e.

It has Sonia written on the board which is the name of his daughter.

Other boards had S + S written on them, Sharon and steve his wife.

Theres some history right there for you. I remember one of these on a station when I was a kid, took about 45 mins to warm up and settle on frequency

User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 2677
Joined: Thu Aug 21, 2014 11:37 am

Re: Old Rig

Post by teckniqs » Sun Dec 08, 2019 10:19 pm

Ahh fair enough, I was told that it was Roger who built it anyway, I found that picture on an old hard drive after about 15 years.

User avatar
Twista UK
no manz can test innit
no manz can test innit
Posts: 125
Joined: Sun Sep 06, 2015 7:54 am

Re: Old Rig

Post by Twista UK » Mon Dec 09, 2019 8:30 am

Dream FM used to get their rigs from scott back in the day. does anyone have any pictures of any scott rigs ive not ever seen one before with the box open

Albert H
proppa neck!
proppa neck!
Posts: 1633
Joined: Tue Apr 05, 2016 1:23 am

Re: Old Rig

Post by Albert H » Thu Dec 12, 2019 5:17 pm

Banus_radio wrote:
Sun Dec 08, 2019 8:22 pm
teckniqs wrote:
Sat Dec 07, 2019 6:55 am
Old Roger 50w rig from around 1986/87

Image
Wrong, That's a TX-35 built buy Steve B******e.

It has Sonia written on the board which is the name of his daughter.

Other boards had S + S written on them, Sharon and Steve
Someone brought three or four of those things 'round to my place when I was living in Islington in the 80s. They were harmonically pretty good, but drifted badly. I made a little "above board" that sampled the output from the BLW16 (I think) stage after the oscillator, divided it by 64 in a prescaler IC, then the PLL magic happened at around 25 kHz, with a couple of divider ICs, a 4060 for the reference and a 4046 for the phase comparator. I used the source follower in the 4046 as part of the loop filter, and added a relay that disconnected the power to the drive and final until the PLL locked. The final was a Thomson SD-series transistor, roughly equivalent to an MRF238, and would deliver around 40 Watts. With the PLL, it was a really good rig. The ones I modified were used by a station in Peckham.
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

mixfm
no manz can test innit
no manz can test innit
Posts: 121
Joined: Sat Jan 31, 2015 10:34 am

Re: Old Rig

Post by mixfm » Thu Dec 12, 2019 9:23 pm

first vfo rig i bought. hot air tx 35, lasted a couple of years on the pirate radio scene in birmingham. running direct rig on roof audio cable down drain pipe, lol; before some b-----d stole it late 1 saturday night,

darren123
ne guy
ne guy
Posts: 8
Joined: Thu Sep 11, 2014 7:00 pm

Re: Old Rig

Post by darren123 » Thu Dec 12, 2019 10:10 pm

teckniqs wrote:
Fri Dec 06, 2019 8:58 am
Yeah you would be safer to use a Chinese sprogg box than use that thing.

....And BLW60C is actually rated at 45w, but I've had not too far off double that amount of power from one in the past with about 8w drive into it at 15VDC, and had 78 watts!!
Yes you are right. Theres no low pass in there. The rig was never used. The final finished article would have a low pass inside. I thought this post topic was to show off your work. Some of the comments are pretty harsh. It's a fully working rig. Yes not finished. Safer to use a chinese sprog box. The rig was made by my own hands and works well. But yes just missing the low pass filter. Thankyou Albert h for your comments I've always found you very constructive and knowledgeable with your information.
Last edited by darren123 on Thu Dec 12, 2019 10:38 pm, edited 1 time in total.

User avatar
Bton-FM
tower block dreamin
tower block dreamin
Posts: 319
Joined: Sun Jun 16, 2019 2:55 pm
Location: Brighton

Re: Old Rig

Post by Bton-FM » Thu Dec 12, 2019 10:27 pm

darren123 wrote:
Thu Dec 05, 2019 11:24 pm
Here's a rig I knocked up for a station called fusion fm 90.2
Is that fusion from the west midlands?

darren123
ne guy
ne guy
Posts: 8
Joined: Thu Sep 11, 2014 7:00 pm

Re: Old Rig

Post by darren123 » Thu Dec 12, 2019 10:41 pm

Bton-FM wrote:
Thu Dec 12, 2019 10:27 pm
darren123 wrote:
Thu Dec 05, 2019 11:24 pm
Here's a rig I knocked up for a station called fusion fm 90.2
Is that fusion from the west midlands?
Yes it was fusion from the west midlands. It was years ago when it finished and never returned

User avatar
teckniqs
proppa neck!
proppa neck!
Posts: 2677
Joined: Thu Aug 21, 2014 11:37 am

Re: Old Rig

Post by teckniqs » Fri Dec 13, 2019 7:18 am

darren123 wrote:
Thu Dec 12, 2019 10:10 pm
teckniqs wrote:
Fri Dec 06, 2019 8:58 am
Yeah you would be safer to use a Chinese sprogg box than use that thing.

....And BLW60C is actually rated at 45w, but I've had not too far off double that amount of power from one in the past with about 8w drive into it at 15VDC, and had 78 watts!!
Yes you are right. Theres no low pass in there. The rig was never used. The final finished article would have a low pass inside. I thought this post topic was to show off your work. Some of the comments are pretty harsh. It's a fully working rig. Yes not finished. Safer to use a chinese sprog box. The rig was made by my own hands and works well. But yes just missing the low pass filter. Thankyou Albert h for your comments I've always found you very constructive and knowledgeable with your information.
No need to get so offended. ....If you'd explained that when you first put the picture up it would've helped.
But instead you chose to have said "here is a rig I built for a station on 90.2"

If people like Albert didn't comment on people "showing off their work" to see it lacking the most important parts for it to work properly and keep the signal clean, then wouldn't that seem very irresposnsible of them? :shock:

At leaat Chinese rigs have low pass filters and I fail to understand why you would want to waste your time building a whole rig for it to not even have one. I've never heard of anyone just building a rig for display purposes to simply just "show off their work" and even so, you've come to the WRONG place if you want to show off your work if it's missing the most vital parts like that,

.....And further-more Pirate Radio already has a bad enough name for it without the likes of you showing off your work so other people can potentionally copy it and take out the whole radio spectrum. :nodg :rip

livendirect
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 28
Joined: Fri Nov 29, 2019 10:10 pm

Re: Old Rig

Post by livendirect » Tue Dec 31, 2019 3:31 am

projuicer wrote:
Mon Jan 28, 2019 2:19 pm
mixfm wrote:
Sun Jan 27, 2019 11:58 am
heres a 50 watt alan rig we had knocking around, the rig we used to install last result. lol memories... built in a disco light...
Alan liked those Disco lights! I remember seeing one like that round Johnny B's place at some point.
Alan didnt build that rig 100% but i have also seen that rig in johnny b's house thats defo a johnny locker lol :tup
Been there done it and about to do it again

Post Reply