Just looking at swapping out the old 4427 metal can to a newer mrf4427. Is it just a case of redesigning the pcb to fit the mrf4427 and hook it up to the correct wires/tracks ?
The pinout for the mrf4427 is as follows:
Pin 1 Emitter
Pin 2 Collector
Pin 3 Collector
Pin 4 Emitter
Pin 5 Emitter
Pin 6 Base
Pin 7 Base
Pin8 Emitter
Does this mean I just need to hook up to any one of the pins or do I need to use all of them. For example would I need only pin 8 for the emitter or would I need pin 1,4,5 & 8 for it to work ?
MRF4427 help!
-
jvok
- no manz can test innit
- Posts: 220
- Joined: Sun Aug 16, 2020 2:44 pm
Re: MRF4427 help!
You need to connect all the pins
-
XXL
- proppa neck!
- Posts: 537
- Joined: Mon Sep 02, 2019 11:06 am
Re: MRF4427 help!
Is there anything else that needs changing when going from 2n4427 to a mrf4427 ?