MRF101 Band 2

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
Post Reply
User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 462
Joined: Wed Jan 30, 2019 9:35 pm

Re: MRF101 Band 2

Post by rigmo » Mon Dec 26, 2022 7:24 pm

https://www.nxp.com/docs/en/data-sheet/MRF101AN.pdf
Top
XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: MRF101 Band 2

Post by XXL » Mon Dec 26, 2022 7:55 pm

rigmo wrote: ↑Mon Dec 26, 2022 6:53 pm
XXL wrote: ↑Mon Dec 26, 2022 3:52 pm Single. Theres no need for 600w. 300 is fine.
Doesn’t work well and no filter.
Top
User avatar
rigmo
tower block dreamin
tower block dreamin
Posts: 462
Joined: Wed Jan 30, 2019 9:35 pm

Re: MRF101 Band 2

Post by rigmo » Tue Dec 27, 2022 3:46 pm

XXL wrote: ↑Mon Dec 26, 2022 7:55 pm Doesn’t work well and no filter.
the only one good is this one
You do not have the required permissions to view the files attached to this post.
Top
XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: MRF101 Band 2

Post by XXL » Tue Dec 27, 2022 8:02 pm

No gerba files anywhere, can’t buy it from anywhere, and can’t copy it because it’s got fancy coils on it with no parts list.
Top
Albert H
proppa neck!
proppa neck!
Posts: 2778
Joined: Tue Apr 05, 2016 1:23 am

Re: MRF101 Band 2

Post by Albert H » Wed Dec 28, 2022 2:52 am

The coils are made from copper tape, which is really expensive, but handles a lot of power and radiates heat well.
"Why is my rig humming?"
"Because it doesn't know the words!" ;)
Top
XXL
proppa neck!
proppa neck!
Posts: 537
Joined: Mon Sep 02, 2019 11:06 am

Re: MRF101 Band 2

Post by XXL » Wed Dec 28, 2022 3:47 pm

Well if anyone makes one up I’ll happily try it. Even if it only did 200w I’d be happy.
Top
User avatar
sinus trouble
proppa neck!
proppa neck!
Posts: 1410
Joined: Fri Aug 22, 2014 11:34 pm

Re: MRF101 Band 2

Post by sinus trouble » Thu Dec 29, 2022 1:02 am

XXL wrote: ↑Wed Dec 28, 2022 3:47 pm Well if anyone makes one up I’ll happily try it. Even if it only did 200w I’d be happy.
I dunno if this is much help XXL? :)

I am hesitant on commenting on high power amplifiers?

Anyways, you can purchase those PCBs from NXP but they are very pricey! The full parts list is also listed on the NXP datasheet!

The dimensions are also included, so with some careful measurements a design could be replicated at a fraction of the cost!

You do not need to use fancy coils either! Just keep in mind the operating ratings!

A low pass filter can also easily be added! Again, keep an eye on the ratings!
I am as stupid as I look! :|
Top
Post Reply

Return to “Anorak Corner”