rd15hvf1 wide band

Everything technical about radio can be discussed here, whether it's transmitting or receiving. Guides, charts, diagrams, etc. are all welcome.
radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

rd15hvf1 wide band

Post by radium98 » Tue Sep 05, 2017 4:41 pm

Hi I am facing some power problems of this guetting amplifier in the first place, someone has an original plate if yes please help us to put the original values ​​of the coils and the capacitor i dont need the input unit i excit of driver 300 MW to 500 MW, thanks
You do not have the required permissions to view the files attached to this post.

User avatar
Analyser
tower block dreamin
tower block dreamin
Posts: 319
Joined: Fri Sep 26, 2014 9:11 pm

Re: rd15hvf1 wide band

Post by Analyser » Tue Sep 05, 2017 5:02 pm

The photo at the top is of the Turkish board which is sold on Ebay. A few people have tried these and all had problems with the performance, none are doing the power specified.
I think it's a bad copy of a Dutch design. Maybe one of our Dutch friends will see this thread and be able to help.

theproducer
big in da game.. trust
big in da game.. trust
Posts: 63
Joined: Sun Apr 12, 2015 8:54 pm

Re: rd15hvf1 wide band

Post by theproducer » Tue Sep 05, 2017 5:29 pm

Try with 12.4 volts


Sent from my iPhone using Tapatalk
theproducer

User avatar
Analyser
tower block dreamin
tower block dreamin
Posts: 319
Joined: Fri Sep 26, 2014 9:11 pm

Re: rd15hvf1 wide band

Post by Analyser » Tue Sep 05, 2017 7:45 pm

theproducer wrote: Tue Sep 05, 2017 5:29 pm Try with 12.4 volts


Sent from my iPhone using Tapatalk
Lol, that'll do it. :lol:

User avatar
Radio Garfield
big in da game.. trust
big in da game.. trust
Posts: 57
Joined: Mon Jan 30, 2017 7:16 pm

Re: rd15hvf1 wide band

Post by Radio Garfield » Wed Sep 06, 2017 7:41 am

That is crap board and it can be said just by the look on it. Best thing is to remove all the components and place it on the new double side PCB with proper grounding, connectors and shielding.

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Wed Sep 06, 2017 7:10 pm

Analyser thanks for you :)

radio garfield i want to try i need the coils size and component layout of the original board i only get 3 watts

Albert H
proppa neck!
proppa neck!
Posts: 2737
Joined: Tue Apr 05, 2016 1:23 am

Re: rd15hvf1 wide band

Post by Albert H » Wed Sep 06, 2017 9:47 pm

Your 3 Watts will be a mess with that horrible board.

Strip it and start again!
"Why is my rig humming?"
"Because it doesn't know the words!"
;)

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Thu Sep 07, 2017 7:26 pm

Albert H have you any good design i beleive that i dont have the original coils size and the capacitors values

User avatar
Maximus
tower block dreamin
tower block dreamin
Posts: 390
Joined: Wed Jan 21, 2015 1:29 pm
Location: Where you don't need licenses

Re: rd15hvf1 wide band

Post by Maximus » Sat Sep 09, 2017 4:48 pm

3 turns, 6mm diameter:
http://www.amateurradioshop.nl/products ... qvph1f5hq0


Sent from my iPhone using Tapatalk

User avatar
yellowbeard
tower block dreamin
tower block dreamin
Posts: 305
Joined: Wed Jul 08, 2015 5:40 am

Re: rd15hvf1 wide band

Post by yellowbeard » Sat Sep 09, 2017 8:59 pm

Maximus has it right there, but what he really means is it's only €20 to buy a new, proper one.

User avatar
Maximus
tower block dreamin
tower block dreamin
Posts: 390
Joined: Wed Jan 21, 2015 1:29 pm
Location: Where you don't need licenses

Re: rd15hvf1 wide band

Post by Maximus » Tue Sep 12, 2017 11:12 am

yellowbeard wrote:Maximus has it right there, but what he really means is it's only €20 to buy a new, proper one.
Exactly! May as well pay £20 and have it over with lol


Sent from my iPhone using Tapatalk

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Wed Sep 13, 2017 8:46 pm

thanks will do but i need to know what really could deliver ? any one have one and tried .it is hard in my pay to import such amp and all transistor get are trucho

mountainman
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 46
Joined: Tue Sep 26, 2017 2:34 am

Re: rd15hvf1 wide band

Post by mountainman » Mon Oct 30, 2017 4:29 am

I just bought a pair of these mosfets and am trying to get one working at 89.1 MHz while I wait for a new 2SC1946 to arrive for my other project. Theres a guy on ebay selling one that is supposedly wide band but I can't seem to locate it at the moment. It was very minimal in parts count though. Had 2 separate pads to solder your input RF to, one for 100-300mw, the other for 1 to 1.5W.

Has anyone tried building the test circuit on the data sheet? It's spec'd for 175MHz but I have a feeling it may work ok for our FM band:
RD15HVF1 datasheet circuit.JPG
You do not have the required permissions to view the files attached to this post.

mountainman
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 46
Joined: Tue Sep 26, 2017 2:34 am

Re: rd15hvf1 wide band

Post by mountainman » Mon Oct 30, 2017 6:30 am

This is the pic I was looking for earlier. Looks pretty simple to me.
14085166.jpg
Also this one:
88-108MHz_15W com rd15hvf1.gif
both are marketed as Wideband for 88-108MHz FM.

I think I'd build them with through hole parts instead of SMD but that's just me. Looking closer, both circuits are pretty damn similar. I think I'm gonna put together a PCB for the bottom diagram and give it a go with one of my bug type xmitters....
You do not have the required permissions to view the files attached to this post.

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Mon Oct 30, 2017 7:46 pm

yes also me look in the forum i lost where and i cannot get more than 8-11 watts



look up my video

mountainman
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 46
Joined: Tue Sep 26, 2017 2:34 am

Re: rd15hvf1 wide band

Post by mountainman » Mon Oct 30, 2017 8:07 pm

I'd be ok with 11 watts for the first try. Not sure how much heat these guys put off but it would make a nice little transmitter not much bigger than a deck of cards. I wish I could find a PCB layout for the amp. I'm working on drawing it in MS paint then printing it on a thermal transfer sheet for etching. I have two of the RD15s but from the datasheet it says it will tolerate 20:1 SWR! Thats a tough little chip!

mountainman
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 46
Joined: Tue Sep 26, 2017 2:34 am

Re: rd15hvf1 wide band

Post by mountainman » Tue Oct 31, 2017 3:20 am

Heres the PCB layout I'm gonna use to copy the above diagram. I put guide holes in it to replace SMD components with through-hole.
RD15 PCB FINAL.jpg
The pad in the middle with no holes does not seem to have a purpose. I included it in my drawing because it was in the original diagram, though I am uncertain what the original designer was planning on doing with it. It's not in the way of anything except more ground plane.

I just realized the top pads for the RD to mount to need to have their isolaters run all the way out to the edge. Anyone using this is urged to modify the file with MS paint to extend the standoffs to the edge of their board.
You do not have the required permissions to view the files attached to this post.

mountainman
who u callin ne guy bruv
who u callin ne guy bruv
Posts: 46
Joined: Tue Sep 26, 2017 2:34 am

Re: rd15hvf1 wide band

Post by mountainman » Tue Oct 31, 2017 4:09 am

Here, this ones a little prettier.
RD15 PCB FINAL2.3.png
Gotta love slow days @ work!
You do not have the required permissions to view the files attached to this post.

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Tue Oct 31, 2017 11:47 am

This one i already done it and result to me was as i said see in video i get 9w so i wait youre experience and let me know
Tye results for a wideband i think i burnt the rd in half or it was a trucjo chinese copy not original

radium98
proppa neck!
proppa neck!
Posts: 907
Joined: Fri Aug 26, 2016 7:01 pm

Re: rd15hvf1 wide band

Post by radium98 » Tue Oct 31, 2017 11:48 am

This one i already done it and result to me was as i said see in video i get 9w so i wait youre experience and let me know
Tye results for a wideband i think i burnt the rd in half or it was a trucjo chinese copy not original

Post Reply